Effect of pulsed ultrasound treatment compared to continuous mode on microbiological and quality of Mirabelle plum during postharvest storage

The effects of pulsed and continuous ultrasound treatment on microbiological and physiological quality of Mirabelle plum fruit were investigated. Freshly harvested Mirabelle plum was treated with 30‐kHz pulsed and continuous ultrasound at 20 °C for 0, 15, 30, 45 and 60 min and subsequently stored at 4 °C for 10 days. The total count of bacteria, total fungi, decay index, titratable acidity (TA), total soluble solids (TSS), colour, texture, ascorbic acid content and total phenolics was measured. The results showed that pulsed and continuous ultrasonic treatment significantly (P < 0.05) reduced the number of microorganisms and improved the quality of Mirabelle plums during storage. Increasing pretreatment time enhanced the positive effects of pulsed and continuous ultrasound. Also, in terms of the total count of bacteria, total fungi, titratable acidity and total phenolics, the pulsed and continuous ultrasound did not show a significant difference (P < 0.05). However, pulsed ultrasound was better compared to continuous mode in preservation of TSS, colour, texture and ascorbic acid content of the fruit during storage. Our results demonstrated that pulsed ultrasound is an appropriate method for improving safety and maintaining the quality of Mirabelle plum fruit.     

The effect of weathering on durability and deformability properties of granitoid rocks

In this paper, the effects of weathering on durability and deformability properties for three different types of granitoid rocks were investigated. Five weathering grades ranging from fresh to completely weathered rocks were considered for each rock type. Deformability has been evaluated based on failure strain, tangent and secant modulus. For measuring these parameters, at least five uniaxial compressive strength tests with axial strain recorded were conducted on each weathering grade. To assess the weathering effect on the durability behavior of these rocks, a slake durability test was performed up to 40 cycles. The obtained results indicated that uniaxial compressive strength and elastic modulus dramatically decrease with increasing weathering grade. After moderately weathering grade, remarkable damage was observed in the structure and fabric of considered rocks. The results from slake durability tests showed that the slake durability index for each weathering grade has a certain changes trend which can be used in determination of the weathering grade and the long-term durability assessment. Moreover, the results showed that for evaluation of the long-term durability of the mentioned rock types, at least eight cycles should be considered, while two cycles were sufficient for estimation of weathering grade.     

Determination of phenolic profile and antioxidant activity of pistachio hull using high-performance liquid chromatography–diode array detector–electro-spray ionization–mass spectrometry as affected by ultrasound and microwave

The phytochemicals content and radical scavenging activity of pistachio (Pistacia vera L.) hull extract obtained by different solvents (water, ethanol, and butanol) were measured and compared. Water was selected as superior solvent. Ultrasound-assisted aqueous extraction of the hull by power ultrasound (35 kHz) was more efficient in ascending the phytochemicals content than the sonochemical ultrasonication (130 kHz). High-performance liquid chromatography-mass spectrometry showed increased amounts of vanillic acid, p-coumaric acid, naringenin, and catechin in ultrasound-assisted extracts. Post-extraction sonication declined significantly the phenolics amount and antioxidant property of the aqueous extract. Microwave-assisted extraction increased the phenolics and flavonoids content at extract in a power-dependent trend.     

Sterilizing tissue-materials using pulsed power plasma

This paper investigates the potential of pulsed power to sterilize hard and soft tissues and its impact on their physico-mechanical properties. It hypothesizes that pulsed plasma can sterilize both vascular and avascular tissues and the transitive layers in between without deleterious effects on their functional characteristics. Cartilage/bone laminate was chosen as a model to demonstrate the concept, treated at low temperature, at atmospheric pressure, in short durations and in buffered environment using a purposed-built pulsed power unit. Input voltage and time of exposure were assigned as controlling parameters in a full factorial design of experiment to determine physical and mechanical alteration pre- and post-treatment. The results demonstrated that, discharges of 11 kV sterilized samples in 45 s, reducing intrinsic elastic modules from 1.4 ± 0.9 to 0.9 ± 0.6 MPa. There was a decrease of 14.1 % in stiffness and 27.8 % in elastic-strain energy for the top quartile. Mechanical impairment was directly proportional to input voltage (P value < 0.05). Bacterial inactivation was proportional to treatment time for input voltages above 32 V (P < 0.001; R _Sq  = 0.98). Thermal analysis revealed that helix-coil transition decelerated with exposure time and collagen fibrils were destabilized as denaturation enthalpy reduced by 200 μV. We concluded by presenting a safe operating threshold for pulsed power plasma as a feasible protocol for effective sterilization of connective tissues with varying level of loss in mechanical robustness which we argue to be acceptable in certain medical and tissue engineering application.     

Electrical conductivity and percolation threshold of hybrid carbon/polymer composites

The electrical conductivity and percolation threshold of single and hybrid carbon filled composites are experimentally investigated. Polystyrene, carbon fiber (CF) and carbon black (CB) at three CF/CB ratios of 1.67, 3.33, 6.67 were compounded in a twin screw extruder micro‐compounder and compression molded into sheets. The through‐plane and in‐plane electrical conductivity of the composites are measured by 2 and 4 probe techniques. The percolation threshold of the single filler and hybrid composites are determined from the experimental results using a percolation model. The hybrid composites have a higher value of electrical conductivity and lower percolation threshold than the single CF filler composite except for the CF/CB ratio of 6.67. The percolation threshold for the cases of single filler and hybrid composites are modeled. The hard core / soft shell model is used and it is assumed that the percolation in a particle filled system depends on the ratio of tunneling distance to particle diameter. This ratio is determined by modeling single filler composites using the experimental data and kept constant in the modeling of the hybrid system. Finite size scaling is used to determine the percolation threshold for the infinite size hybrid system containing (nanosize) particles and micron size fibers for three CF/CB ratios. The simulation results show that the percolations of hybrid composites have the same trends observed in the experimental results. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41744.     

Resorcinol formaldehyde xerogels modified with mercapto functional groups as mercury adsorbent

Resorcinol formaldehyde xerogels are modified by mercaptopropyl‐trimethoxysilane during the sol–gel process used to produce the xerogel. The chemical modification is confirmed by Fourier‐transform infrared spectroscopy. The xerogel is then used to adsorb mercury ions from aqueous solutions. The effects of the molar ratios of the precursors as well as the catalyst and the modifier are studied on the textural properties of the xerogel and the adsorption efficiency. It is shown that the chemical modification of the resorcinol formaldehyde xerogels creates the chemical sites on the structure of the xerogel to adsorb more mercury ions and increase the adsorption efficiency. At the same time, chemical modification decreases the xerogel surface area which results in a reduction of the mercury adsorption. Therefore, there exists an optimum value for the chemical modification of the xerogel to achieve the highest adsorption efficiency. Adsorption kinetics as well as equilibrium isotherm of xerogels were examined using pseudo‐first‐ and second‐order kinetic equations, and Freundlich and Langmuir isotherm models. The adsorption kinetics was found to follow the pseudo‐second‐order kinetic equations. The experimental data was also fitted into the Longmuir model more precisely comparing the Freundlich model. Finally, a series of mercury adsorption–desorption tests proved that the optimized mercapto‐modified resorcinol formaldehyde xerogel was an efficient reusable adsorbent for mercury ions. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42543.     

Compiling Vector Pascal to the XeonPhi

Intel's XeonPhi is a highly parallel x86 architecture chip made by Intel. It has a number of novel features which make it a particularly challenging target for the compiler writer. This paper describes the techniques used to port the Glasgow Vector Pascal Compiler to this architecture and assess its performance by comparisons of the XeonPhi with 3 other machines running the same algorithms. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and Characterization of Pure Phase Zn(II) and Cd(II) Oxide Nanoparticles via Thermal Decomposition of Four New Zn(II) and Cd(II) Coordination Polymers

Four new Zn(II) and Cd(II) coordination polymers, [Zn(2-AMP)₂(N₃)₂]_n (1), [Zn(2-AMP)₂(SCN)₂]_n (2), [Cd(2-AMP)(N₃)₂]_n (3) and [Cd(2-AMP)₂(SCN)₂]_n (4) {2-AMP: 2-Aminomethylpyridine}, have been synthesized and characterized by single crystal X-ray diffraction, IR spectroscopy and elemental analyses. The Zinc(II) oxide and Cadmium(II) oxide nano-particles have been synthesized from thermolysis of 1–4 at 600 °C under air atmosphere for 4 h. The ZnO and CdO nanoparticles were characterized by X-ray diffraction and scanning electron microscopy (SEM). SEM images show the average size of produced ZnO and CdO nanoparticles are 60–70 nm in all compounds.     

Bimetal cup hydroforming of Al/St and Cu/St composites: Adaptive finite element analysis and experimental study

Journal of Mechanical Science and Technology - An adaptive Finite element analysis (FEA) was proposed in this paper for the industrial design of bimetal conical-cylindrical cup hydroforming....